Home > Band Parts > Speargun Wishbones / Polespear Bridles > Spectra®¹ Wishbones / Bridles > Do-It-Yourself Spectra®¹ Wishbone / Bridle Supplies > Spectra®¹ Wishbone / Bridle Cord >

Spearit 3.0mm(1050lb) Spectra® Wishbone Cord
Spearit Spectra Speargun Line
 
Spearit's 3mm Spectra®¹ braid is our extra heavy duty wishbone cord. It is intended for use with full sized shark fins when there is a separate fin for every band. We also recommend it for use with large sharp edged notches as it will stand up to the punishment. We do not recommend it for mini-fins, small stots or if multiple bands will be stacked on a single shark fin.

Item# Item Name Price Quantity Add
LINE-SP30-W010  10ft 3mm Braided Spectra® Line
$5.99
LINE-SP30-W001  per foot 3mm Braided Spectra® Line
$0.75
Check the items you wish to purchase, then click


Important Product Notes:

¹Spectra® is a trademark of Honeywell International a U.S. corporation. 100% of the fiber contained in our braided Spectra® cords is genuine Spectra® manufactured in America by Honeywell. All additional processing of the Spectra fiber is performed by Spearit Group LLC and its subcontractors excluding Honeywell.

Warning -This cord is not intended or tested for climbing or hoisting. Tensile testing is done under ideal conditions. Common practices and factors will significantly degrade the strength of this product including but not limited to, knotting, environmental exposure and normal wear and tear.



Tech Specs:
Material - 100% Honeywell Spectra fiber Construction - 16 carrier braid over parallel core Tensile Test Strength - 550lb minimum (Tensile testing is done under laboratory conditions. Many factors will degrade performance including normal wear and tear, environmental exposure and knots. This line is not for climbing.)