Home > Hand Crafted Bands > Polespear Bands / Slings >

Spearit Polespear Bands
1/2in(13mm) Kent Rubber
Spectra® Bridle
Spearit ½ inch Polespear Bands
 
Alternative Views:


Spearit's 1/2 inch(13mm) Pro Polespear Bands are made with high quality latex rubber tubing manufactured in the U.S.A. by Kent Elastomer of Ohio. The wishbones are made from our NTR™ Insert Terminals and super tough 1.9mm Spectra®¹ Cord. The NTR™ inserts make modifying the length of the wishbone or replacing it a snap. You can find more detailed information under the Tech Specs tab.

Choose the band length from list above. For efficiency sake, we keep a small inventory of the most popular sizes and we pass the savings on to you. These are denoted as STOCK in the size list. Bands sizes denoted as CUSTOM are made to order, usually within 24 hours.




Item# Item Name Price Quantity Add
POLE-BAND-2313 23in(58cm) x 1/2in BLACK Band
$13.49
POLE-BAND-2413 24in(61cm) x 1/2in BLACK Band
$13.49
POLE-BAND-2613 26in(66cm) x 1/2in BLACK Band
$13.49
POLE-BAND-2813 28in(71cm) x 1/2in BLACK Band
$13.49
POLE-BAND-3013 30in(76cm) x 1/2in BLACK Band
$14.49
POLE-BAND-3213 32in(81cm) x 1/2in BLACK Band
$14.49
POLE-BAND-3413 34in(86cm) x 1/2in BLACK Band
$14.49
Check the items you wish to purchase, then click


Important Product Notes:

¹Spectra® is a trademark of Honeywell International a U.S. corporation. 100% of the fiber contained in our braided Spectra® cords is genuine Spectra® manufactured in America by Honeywell. All additional processing of the Spectra fiber is performed by Spearit Group LLC and its subcontractors excluding Honeywell.

²Kevlar® is a trademark of E. I. du Pont de Nemours and Company a U.S. corporation more commonly referred to as DuPont. 100% of the fiber contained in our braided Kevlar® cords is genuine Kevlar® manufactured in America by Dupont. All additional processing of the Kevlar® fiber is performed by Spearit Group LLC and its subcontractors excluding Dupont.





Tech Specs:
  • Rubber Tubing Size: 1/2 inch (13mm) O.D. x 1/4 inch (6mm) I.D.
  • Rubber Manufacturer: Kent
  • Rubber Color: Black
  • Rubber Length Between Constriction Points: 1/2 inch (13mm) less than overall rubber length
  • Wishbone Type: NTR™Insert terminals with 1.9mm Spectra® Braid
  • Wishbone Length: 9 inch (23cm) measured between constriction points




Compatibility:
General Compatibility - This item can be used with some products of IST®, Riffe®, JBL®, Sea Stinger®, Henley®, Cressi®, Biller®, Omer®, Head Hunter®, Gat-Ku®, Mako®, Bandito®, Trident®, and more. Spearit Group LLC unaffiliated with these manufacturers.