Home > Band Parts > Speargun Rubber > 9/16in(14mm) O.D.
Speargun Rubber Tubing
>


Primeline Small ID Speargun Rubber Tubing
9/16in(14mm) Outside Dia.1/16in(1.5mm) Inside Dia.

spearitco.com Small ID 9/16 inch (14mm) Speargun Rubber
 
Alternative Views:


Spearit Bullseye Small ID 9/16 inch speargun rubber is manufactured by Primeline Industries of Ohio, U.S.A., to our premium specifications. Bullseye's 1/16 inch inside diameter means a little more rubber and 75% less internal cavity volume. Less volume means less water intrusion which translates to increased and more consistent performance.

    Curious about the manufacturing process?
    Wondering why you can't buy natural latex tubing in longer continuous pieces?
    Check out our Knowledge Base article on Dip Manufacturing.




    Item# Item Name Total Quantity Add
    RUBR-141T-02FT

    2ft(0.6m) BLACK(AMBER CORE) 9/16in Small Hole Rubber

    $12.99
    RUBR-141T-03FT

    3ft(0.9m) BLACK(AMBER CORE) 9/16in Small Hole Rubber

    $14.99
    RUBR-141U-02FT 2ft(0.6m) BLUE(AMBER CORE) 9/16in Small Hole Rubber
    $12.99
    RUBR-141U-03FT 3ft(0.9m) BLUE(AMBER CORE) 9/16in Small Hole Rubber
    $14.99
    RUBR-141U-04FT 4ft(1.2m) BLUE(AMBER CORE) 9/16in Small Hole Rubber
    $14.99
    RUBR-141U-05FT 5ft(1.5m) BLUE(AMBER CORE) 9/16in Small Hole Rubber
    $19.99
    RUBR-141U-10FT 10ft(3m) BLUE(AMBER CORE) 9/16in Small Hole Rubber
    $39.99
    RUBR-141U-20FT 20ft(6m) BLUE(AMBER CORE) 9/16in Small Hole Rubber
    $68.99
    RUBR-141U-30FT 30ft(9m) BLUE(AMBER CORE) 9/16in Small Hole Rubber
    $95.99
    RUBR-141U-50FT 50ft(15m) BLUE(AMBER CORE) 9/16in Small Hole Rubber
    $146.99
    Check the items you wish to purchase, then click


    Tech Specs:

    Dimensions


    Outside Diameter - 9/16in (14mm)
    Inside Diameter - 1/16in (1.5mm)
    Outside Diameter Tolerance - ±0.02in
    Length - The described length is the minimum length and the actual length will be greater in most cases.

    Physical Properties for Primeline Industries Latex Rubber Tubing

    Modulus at 100% - 125 PSI maximum
    Tensile Strength - 3500 PSI minimum
    Elongation at Break: - 750% minimum
    Specific Gravity - 0.97 maximum
    Shore A Durometer Hardness - 35 ± 5


    Physical Properties for Kent Elastomer Latex Rubber Tubing

    Modulus at 100% - 120 PSI average
    Modulus at 300% - 190 PSI maximum
    Modulus at 500% - 300 PSI minimum
    Tensile Strength - 3500 PSI minimum
    Elongation at Break: - 750%
    Specific Gravity - 0.95 minimum
    Shore A Durometer Hardness - 35 ± 5





    Compatibility:

    General Compatibility - This item can be used with some products of Riffe®, Wong®, Mako®, Koah®, Hammerhead®, C4®, Salvimar®, Spetton®, Rob Allen®, JBL®, Cressi®, Picasso®, Beauchat®, Biller®, Ocean Rhino®, Spearfishing Specialties®, Sea Hornet®, Omer®, Demka®, Bandito®, and more. Spearit Group LLC unaffiliated with these manufacturers.